UAT

Hit enter to search or ESC to close

PROMOTIONSVisit
NEWSVisit
SHED DESIGNERVisit
LOCATIONS PCVisit
ABOUT USVisit
RESOURCESVisit
FRANCHISINGVisit
SERVICE AREASVisit

GET A QUOTE

Aircraft Hangars

Commercial
Aircraft Hangars

Get a Quote

We know aircraft hangars. Catering for high winds, tail-wing height, wing spans, safety access requirements and chemical or materials storage – with us, we have you covered.

You’ll know that our aircraft hangars are up to Mother Nature’s demands, because all of our designs will go through ShedSafe’s site check process. This ensures that the hangar’s engineering is sound and will be fit-for-purpose for the hangar’s specific location.

Easy access is also no problem. In addition to ensuring functional front access using Eltrak’s door system, we also offer Personal Access Doors and Taurean’s Windstrong series for any side access you might need. There’s also added extras if you need them – fire resistant panels, insulation, mezzanine floors and others, if that’s what you need.

Let’s get started and find out what your project needs.  

Stramit® Corrugated roof and wall cladding
  • Corrugated cladding provides a traditional aesthetic, enhanced by modern design
  • Lightweight and simple to install
  • A cost-effective option for those looking to build a quality hangar on a budget.
Corrugated cladding on a skillion shed with lean-to
Stramit Monoclad® roof and wall cladding
  • Monoclad® cladding offers a balanced mix of efficient water-carrying, simple fixings and top-notch wind-load capabilities
  • Stramit’s Monolap® joint-system compatible, which allows for long-run, single-pane roofing.
Close up of Stramit Monoclad wall cladding
Stramit Longspan® roof and wall cladding
  • Another cost-effective option for plane owners looking for something with additional design appeal
  • Its architectural versatility makes this cladding perfect for creating your own design
  • Features variable screw patterns that allow for unlimited design creativity.
Close up of Stramit Longspan profile
Stramit K-Panel® wall sheeting
  • This wide-cover cladding is perfect for smaller aircraft hangars
  • It’s simple and easily installed onto your hangar
  • A perfect option for small aircraft owners working on a budget, K-panel® sheeting facilitates smaller flashing with its lower profile.
K-Panel shed with glass sliding door
Stramit Monopanel® wall cladding
  • Monopanel® cladding uses a concealed fixing method that hides any visible lines and gives the hangar a clean and together aesthetic
  • Monopanel cladding comes in a wide variety of colours to suit all styles.
  • Not available in Queensland, Northern Territory, or Western Australia.
Close up of Stramit Monopanel wall cladding
Stramit® C-Clad 280 wall sheeting
  • Enhance the look of your hangar with traditional lines
  • Easy to install and features concealed fixings
  • Low profile allows for smaller flashing 
  • Suits both horizontal or vertical installation.
Stramit SharpLine® architectural wall cladding
  • Set your hangar apart from all others, through defined and visually striking panels
  • The tall and thin ribs of the SharpLine® give hangars a distinctive and clean look
  • Is installed vertically, and is available with direct-fix fastenings.
Close up of Stramit SharpLine wall cladding

The large range of COLORBOND® steel range of designer colours offers a classic and contemporary palette to enhance the beauty of every build.

COLORBOND® steel
Southerly®

COLORBOND® steel
Bluegum®

COLORBOND® steel
Night Sky®

COLORBOND® steel
Surfmist®

COLORBOND® steel
Shale Grey™

COLORBOND® steel
Evening Haze®

COLORBOND® steel
Dune®

COLORBOND® steel
Woodland Grey®

COLORBOND® steel
Monument®

COLORBOND® steel
Gully™

COLORBOND® steel
Jasper®

COLORBOND® steel
Wallaby®

COLORBOND® steel
Ironstone®

COLORBOND® steel
Deep Ocean®

COLORBOND® steel
Windspray®

COLORBOND® steel
Basalt®

COLORBOND® steel
Pale Eucalypt®

COLORBOND® steel
Cottage Green®

COLORBOND® steel
Manor Red®

COLORBOND® steel
Paperbark®

COLORBOND® steel
Classic Cream™

COLORBOND® steel
Dover White™



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The COLORBOND® steel colour swatches displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

COLORBOND® steel and ® colour names are registered trademarks of BlueScope Steel Limited. ABN 16 000 011 058.

More protection for steel buildings in coastal and industrial environments.

COLORBOND® Ultra steel
Shale Grey™

COLORBOND® Ultra steel
Monument®

COLORBOND® Ultra steel
Woodland Grey®

COLORBOND® Ultra steel
Surfmist®

COLORBOND® Ultra steel
Dune®

COLORBOND® Ultra steel
Wallaby®

COLORBOND® Ultra steel
Windspray®



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The COLORBOND® Ultra steel colour swatches displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

COLORBOND® Ultra steel and ® colour names are registered trademarks of BlueScope Steel Limited. ABN 16 000 011 058.

Create a softer, more subtle look with a true Matt finish.

COLORBOND® steel Matt
Bluegum®

COLORBOND® steel Matt
Monument®

COLORBOND® steel Matt
Basalt®

COLORBOND® steel Matt
Surfmist®



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The COLORBOND® steel Matt colour swatches displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

COLORBOND® steel Matt and ® colour names are registered trademarks of BlueScope Steel Limited. ABN 16 000 011 058.

Achieve the design edge you’re looking for with the UniCote® LUX world-first, innovative multi-paint method and stand out from the crowd.
UniCote® LUX finishes are only available in Stramit SharpLine® and Monopanel® cladding.

UniCote LUX Stramit Silver Quartz Swatch

UniCote® LUX
Silver Quartz

UniCote Lux Stramit Weathered Iron Swatch

UniCote® LUX
Zinc Graphite

UniCote Lux Stramit Pentagon Swatch

UniCote® LUX
Pentagon

UniCote Lux Stramit Spectrum Swatch

UniCote® LUX
Spectrum

UniCote Lux Stramit Weathered Iron Swatch

UniCote® LUX
Weathered Iron

Swatch of close up UniCote LUX Ashwood woodgrain texture

UniCote® LUX
Ashwood



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The UniCote® LUX images displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

UniCote® is a registered trademark of Colossal Management Pty Ltd.

Apply MagnaFlow® sheeting to your steel building projects for more durability and extra protection in corrosive environments.

MagnaFlow®
Off White

MagnaFlow®
Birch

MagnaFlow®
Armour Grey

MagnaFlow®
Slate Grey

MagnaFlow®
Monolith



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The MagnaFlow® colour swatches displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

MagnaFlow® is a registered trademark of Fletcher Building Holdings Limited.

SuperDura™ Stainless steel is design to provide performance in severe coastal and industrial environments.

SuperDura™ Stainless steel
Windspray®

SuperDura™ Stainless steel
Dune®

SuperDura™ Stainless steel
Deep Ocean®



Colour lead times may vary on certain finishes in some areas. Check with your Fair Dinkum Builds representative before ordering.

The SuperDura™ Stainless steel colour swatches displayed have been reproduced to represent actual product colours as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions, screens and devices may affect colour tones and finishes.

SupaDura™ Stainless steel and ® colour names are trademarks of BlueScope Steel Limited. ABN 16 000 011 058.

We utilise the most innovative and cutting-edge programming tools and design software to tailor your hangar’s size, width, height, and shape to meet your needs. Let us work your hangar around the space you have – not the other way around.

  • Sliding access doors provide increased flexibility in accommodating aircraft dimensions
  • They let you open an entire wall of your hangar for aircraft access
  • Can increase the ventilation to the hangar, whilst still providing protection and security.
  • The smooth operation of these roller doors is perfect for any hangar
  • Features galvanised brackets and tracks that will work securely for years
  • A direct drive gear system (smaller sized doors) and planetary gear system (larger sized doors) are available on the Taurean® Commando roller doors to allow raising the door easier
  • Available in both COLORBOND® steel and ZINCALUME® steel.

These Taurean Door Systems roller doors are also offered with Grifco automatic door openers.

  • A perfect option for hangars in high wind regions
  • Includes a flexible strip within the interior to block our leaves or debris
  • Its larger size provides extra access to your hangar.

These Taurean Door Systems roller doors are also offered with Merlin or Grifco automatic door openers.

  • Its smooth opening mechanism is built to withstand high volume usage
  • A sturdy, quiet and all-round reliable roller door
  • Provides standard roller door access in commercial properties or aircraft hangars.

These Taurean Door Systems roller doors are also offered with Merlin or Grifco automatic door openers.

11 degrees
  • A classic, subtle roof pitch that emphasises your hangar’s strength and stability
  • Perfect for Gable-roofed aircraft hangars.
15 degrees
  • A 15º pitch gives a clean, defined and aesthetically pleasing roofline
  • Gives excellent performance in heavy rainfall areas
  • Its sizable internal clearance area offers plenty of room for an aircraft and more.
22 degrees
  • The ideal roof pitch to attach solar panels onto
  • Its ample internal clearance area has room for aircraft or storage mezzanine
  • Performs excellently under all weather conditions.
Step skillion
  • Add some intrigue and allure to your hangar through contemporary, modern design
  • Provides height flexibility and gives the option of additional storage space on one side
  • Perfect for hangars near boundaries with height restrictions.
Eave overhangs
  • A popular decision for those who want a modern looking aircraft hangar
  • The eaves provide protection from the elements to any doors and entry points
  • Can be ideal for both colder and warmer climates.
Lean-to side walls
  • Get the most out of your hangar by adding additional storage or parking space
  • Can either be clad with walls or left open
  • Provides an additional shaded area to protect from both rain and sun.
Personal access doors
  • Provide simple and easy access to your hangar – without opening the main door
  • Can be made to fit varying size requirements, including wheelchairs
  • Customers can find personal access doors in all 22 COLORBOND® steel colour options, plus COLORBOND® steel Matt.
Man holding open the personal access door on his COLORBOND steel matt garage with a four wheel drive parked inside
Windows
  • Designed to let natural light into a hangar and block out rain, wind and cold
  • Save on and heating costs by letting the Aussie sun work its magic
  • Reliable performance from the durable AMIA window range.
Man walking through a shed home office with plants and computers
Insulation
  • Prevent excess heat inside your hangar during the summer, with optional R rating
  • Avoid discomfort when working in your hangar, regardless of the weather conditions
  • Choose the right solution for your hangar from our range of Fletcher Insulation products.
Interior shot of a fully insulated shed
Whirlybirds
  • Prevent stale air by continually circulating the airflow throughout your hangar
  • Minimise condensation and protect your aircraft
  • Make your hangar a comfortable place to work at any point in the year.
Corrugated shed roof featuring whirlybirds
Storage mezzanines
  • Free-up all available storage space
  • Keep the floor of your hangar clutter-free
  • Organise and streamline the functionality of your hangar.
Interior shot of a shed with a boat parked below the mezzanine floor
Stairs
  • Achieve easy and safe access to any storage mezzanines
  • We can create stairs to meet your height requirements
  • Can be crafted from wood, or steel for additional stability.
Internal stairs inside a shed
Partitions
  • Divide your hangar as you see fit
  • Easily create smaller areas, such as offices or storage spaces
  • Gives owners total control over the layout of your aircraft hangar.
Internal shed wall creating one large open bay and one smaller bay
Gutters
  • Help prevent water damage through an effective runoff system
  • Create a rainwater solution to meet your needs and suit your local region
  • Available in a wide range of COLORBOND® steel colours and a range of finishes to suit any customers’ tastes.
Shot of the underside of eaves showing the downpipes and gutters
Skylights
  • Let natural Aussie sunlight brighten up your hangar
  • Save on heating costs during the day
  • Make your hangar more visually appealing through fibreglass or extra-durable polycarbonate skylight sheeting.
Inside of a gable roof shed with translucent skylight panels
Open bays
  • Achieve quick and easy access to your aircraft hangar
  • Increase the airflow and ventilation by removing part of your hangar wall.
Rural shed with 3 open bays
Fire-rated walls
  • Increase protection for your hangar and your stored aircraft from fires
  • Ensure your hangar meets the requirement that industrial and commercial buildings built within three metres of boundary lines must have fire-rated walls
  • Features Stramit’s Uniguard™ fire resisting boundary wall system.
Stramit Uniguard™ fire resisting boundary wall system in green

Our industry-leading system warranty offers you peace of mind and security. All Fair Dinkum Builds designs are engineered using our unique software solutions and backed by our technical expertise, meaning we'll guarantee they'll withstand wind conditions for 30 years.

That's over and above any materials warranty you get from our suppliers.

Our system warranty is subject to the limitations and qualifications set out in the Warranty Terms and Conditions available here.

Our products are engineered to the highest safety standards and therefore comply with all national, state and territory building code requirements.

Our sheds are also ShedSafe accredited - an industry recognised stamp of approval, so you know that your shed will protect you, your family and your investment.

Designed specifically with you and your business in mind

No matter what you use your business space for, you’ll find the ideal solution with us. All our aircraft hangars are fully compliant with all relevant legislation and built to withstand the harsh Australian environment.

DOWNLOAD OUR COMMERCIAL RANGE BROCHURE NOW

News